EasyManua.ls Logo

TP-Link JetStream L2 - Temperature Threshold

TP-Link JetStream L2
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Choose the menu SwitchingDDMDDM Config to load the following page.
Figure 5-6 DDM Config
The following entries are displayed on this screen:
Port Config
Select:
Select the desired port for configuration. It is multi-optional.
Port:
Displays the port number.
DDM Status
: Select Enable/Disable the DDM status of the port.
Shutdown
: Specify whether to shut down the port when
an exceeding
alarm threshold or warning threshold event is encountered.
Alarm: Shut down the port when
an exceeding alarm
threshold event is encountered.
Warning: Shut down the port when
an exceeding warning
threshold event is encountered.
None: The port will never be shut down regardless
of the
exceeding alarm threshold and warning threshold events
.
This is the default option.
LAG:
Displays the LAG number which the port belongs to.
5.2.2 Temperature Threshold
On this page, you can view and configure the DDM Temperature Threshold for specific ports on
the switch.
Choose the menu SwitchingDDMTemperature Threshold to load the following page.
Figure 5-7 Temperature Threshold

Table of Contents

Other manuals for TP-Link JetStream L2

Related product manuals