EasyManua.ls Logo

TP-Link JetStream L2 - Firmware Upgrade; System Reboot

TP-Link JetStream L2
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
The following entries are displayed on this screen:
Config Backup
Backup Config:
Click the Backup Config button to save the current configuration
as a file to your computer. You are
suggested to take this
measure before upgrading.
Note:
It will take a few minutes to back up the configuration. Please wait without any operation.
4.3.3 Firmware Upgrade
The switch system can be upgraded via the Web management page. To upgrade the system is to
get more functions and better performance. Go to http://www.tp-link.com to download the updated
firmware.
Choose the menu SystemSystem ToolsFirmware Upgrade to load the following page.
Figure 4-15 Firmware Upgrade
Note:
1. Don’t interrupt the upgrade.
2. Please select the proper software version matching with your hardware to upgrade.
3. To avoid damage, please don't turn off the device while upgrading.
4. After upgrading, the device will reboot automatically.
5. You are suggested to back up the configuration before upgrading.
4.3.4 System Reboot
On this page you can reboot the switch and return to the login page. Please save the current
configuration before rebooting to avoid losing the configuration unsaved
Choose the menu SystemSystem ToolsSystem Reboot to load the following page.
Figure 4-16 System Reboot

Table of Contents

Other manuals for TP-Link JetStream L2

Related product manuals