243
14.1.2 SNMP View
The OID (Object Identifier) of the SNMP packets is used to describe the managed objects of the
switch, and the MIB (Management Information Base) is the set of the OIDs. The SNMP View is
created for the SNMP management station to manage MIB objects.
Choose the menu SNMP→SNMP Config→SNMP View to load the following page.
Figure 14-4 SNMP View
The following entries are displayed on this screen:
View Config
Give a name to the View for identification. Each View can
include several entries with the same name.
Enter the Object Identifier (OID) for the entry of View.
Select the type for the view entry.
• Include:
The view entry can be managed by the SNMP
management station.
• Exclude: The view entry cannot
SNMP management station.
View Table
Select
the desired entry to delete the corresponding view. All
the entries of a View will be deleted together.
Displays the name of the View entry.
Displays the type of the View entry.
Displays the OID of the View entry.
14.1.3 SNMP Group
On this page, you can configure SNMP Group to control the network access by providing the users
in various groups with different management rights via the Read View, Write View and Notify View.
To Next Page
Loading...
Need help?
General