EasyManua.ls Logo

TP-Link JetStream L2 - Cluster Config

TP-Link JetStream L2
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
286
16.3.2 Cluster Config
On this page you can configure the status of the cluster the switch belongs to.
Choose the menu ClusterClusterCluster Config to load the following page.
For a candidate switch, the following page is displayed.
Figure 16-13 Cluster Configuration for Candidate Switch
The following entries are displayed on this screen:
Current Role
Role: Displays the role the current switch plays in the cluster.
Role Change
Individual:
Select this option to change the role of the switch to be individual
switch.
Commander: Select this option to change the role of the switch to be
commander switch, and then configure the cluster:
Cluster Name: Configure the name of the current cluster the
switch belongs to.
IP Pool & Mask: Configure the private IP range of the member
switches in the cluster.

Table of Contents

Other manuals for TP-Link JetStream L2

Related product manuals