EasyManua.ls Logo

TP-Link JetStream L2 - Combined ACL

TP-Link JetStream L2
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
194
S-Port:
Configure TCP/IP source port contained in the rule when TCP/UDP is
selected from the pull-down list of IP Protocol.
D-Port: Conf
igure TCP/IP destination port contained in the rule when
TCP/UDP is selected from the pull-down list of IP Protocol.
DSCP: Enter the DSCP information contained in the rule.
IP ToS: Enter the IP-ToS contained in the rule.
IP Pre: Enter the IP Precedence contained in the rule.
Time-Range: Select the time-range for the rule to take effect.
12.2.6 Combined ACL
Combined ACLs analyze and process data packets based on a series of match conditions, which
can be the source MAC addresses, destination MAC addresses source IP addresses, destination
IP addresses and other information of this sort carried in the packets.
On this page you can create Combined ACL rules.
Choose the menu ACLACL ConfigCombined ACL to load the following page.
Figure 12-9 Creat Combined ACL
The following entries are displayed on this screen:
Create combined Rule
ACL ID: Select the desired Combined ACL for configuration.
Rule ID: Enter the rule ID.

Table of Contents

Other manuals for TP-Link JetStream L2

Related product manuals