EasyManua.ls Logo

TP-Link JetStream L2 - Application Authentication List Config

TP-Link JetStream L2
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
235
3) Configure the authencation method with priorities. The options are local, none, radius, tacacs
or user-defined server groups.
View and delete the configured method priority list in the Authentication Login Method List and
Authentication Enable Method List. .
Entry Description:
Met
hod List
Name:
Define a method list name.
List Type:
Specify the authentication type as Login or Enable. Login stands
for the Authentication Login Method List, and Enable stands for the
Authentication Enable Method list.
Pri1, Pri2, Pri3,
Pri4:
Specify t
he authentication methods in order. The next
authentication method is tried only if the previous method does not
respond, not if it fails.
local: Use the local database in the switch for authentication.
none: No authentication is used.
radius: Use the remo
te RADIUS server/server groups for
authentication.
tacacs:
Use the remote TACACS+ server/server groups for
authentication.
user-defined server group: Use the user-
defined server
groups for authentication.
Tips:
If the Enable password is verified on the remote RADIUS server, the switch will send the Enable
authentication with the default username as $enable$.
13.7.7 Application Authentication List Config
Users can configure authentication method lists on the following access applications: console,
telnet, ssh and http.
Choose the menu Network SecurityAAAGlobal Config to load the following page.
Figure 13-8 Application Authentication Settings
Configuration Procedure:
1) Select the application module.

Table of Contents

Other manuals for TP-Link JetStream L2

Related product manuals