EasyManua.ls Logo

TP-Link JetStream L2 - Protocol Template

TP-Link JetStream L2
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
75
Protocol VLAN Table
Select:
Select the desired entry. It is multi-optional.
Protocol:
Displays the protocol template of the VLAN.
Ether Type:
Displays the Ethernet protocol type field in the protocol template.
VLAN ID:
Displays the corresponding VLAN ID of the protocol.
Operation:
Click the Edit
button to modify the settings of the entry. And click the
Modify button to apply your settings.
6.3.2 Protocol Template
The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.
Choose the menu VLANProtocol VLANProtocol Template to load the following page.
Figure 6-10 Create and View Protocol Template
The following entries are displayed on this screen:
Create Protocol Template
Protocol Name:
Give a name for the Protocol Template.
Ether Type:
Enter the Ethernet protocol type field in the protocol template.
Protocol Template Table
Select:
Select the desired entry. It is multi-optional.
Protocol Name:
Displays the name of the protocol template.
Et
her Type: Displays the Ethernet protocol type field in the protocol template.
Note:
The Protocol Template bound to VLAN cannot be deleted.

Table of Contents

Other manuals for TP-Link JetStream L2

Related product manuals