TP-Link JetStream L2 User Manual

5
Chapter Introduction
Chapter 10 Multicast
This module is used to configure multicast function of the switch.
Here mainly introduces:

IGMP Snooping: Configure global parameters of IGMP
Snooping function, port properties, VLAN and multicast VLAN.
 MLD Snooping: Configure global parameters of MLD Snooping
function, port properties, VLAN and multicast VLAN.
 Multicast Table: View the
information of IPv4 and IPv6
multicast groups already on the switch.
Chapter 11 QoS This module is used to configure QoS function to provide different
quality of service for various network applications and
requirements. Here mainly introduces:
 DiffServ: Configure
priorities, port priority, 802.1P priority and
DSCP priority.
 Bandwidth Control: Configure r
ate limit feature to control the
traffic rate on each port; configure storm control feature to filter
broadcast, multicast and UL frame in the network.

Voice VLAN: Configure voice VLAN to transmit voice data
stream within the specified VLAN so as to ensure the
transmission priority of voice data stream and voice quality.
Chapter 12 ACL This module is used to configure match rules and process policies
of packets to filter packets in order to control the access of the
illegal users to the network. Here mainly introduces:
 Time-Range: Configure the effective time for ACL rules.
 ACL Config: ACL rules.
 Policy Config: Configure operation policies.

Policy Binding: Bind the policy to a port/VLAN to take its effect
on a specific port/VLAN.
Chapter 13 Network Security This module is used to configure the multiple protection measures
for the network security. Here mainly introduces:
 IP-MAC Binding: Bind the IP address, MAC address, VLAN ID
and the connected Port number of the Host together.
 DHCP Snooping: DHCP Snooping functions to monitor the
process of the Host obtaining the IP address from DHCP
server, and record the IP address, MAC address, VLAN and
the connected Port number of the Host for automatic binding.
 ARP Inspection: Configure ARP inspection feature to prevent
the network from ARP attacks.

IP Source Guard: Configure IP source guard feature to filter IP
packets in the LAN.

DoS Defend: Configure DoS defend feature to prevent DoS
attack.

802.1X: Configure common access control mechanism for
LAN ports to solve ma
inly authentication and security
problems.
 AAA:
Configure the AAA function protect the device from
unauthorized operations.
 PPPoE Config: Configure the PPPoE Circuit-
ID Insertion
function to support
the authentication, authorization, and
accounting (AAA) access requests on an Ethernet interface.

TP-Link JetStream L2 Specifications

General

Brand	TP-Link
Model	JetStream L2
Category	Switch
Language	English