62
On this page, you can configure the dynamic MAC address entry.
Choose the menu Switching→MAC Address→Dynamic Address to load the following page.
Figure 5-21 Dynamic Address
The following entries are displayed on this screen:
Aging Config
: Allows you to Enable/Disable the Auto Aging feature.
: Enter the Aging Time for the dynamic address.
Search Option
: Select a Search Option from the pull-down list and click the
button to find your desired entry in the Dynamic Address Table.
• MAC: Enter the MAC address of your desired entry.
• VLAN ID: Enter the VLAN ID number of your desired entry.
• Port: Enter the Port number of your desired entry.
• LAG ID: Enter the LAG ID number of your desired entry.
Dynamic Address Table
:
Select the entry to delete the dynamic address or to bind the MAC
address to the corresponding port statically. It is multi-optional.
: Displays the dynamic MAC Address.
: Displays the corresponding VLAN ID of the MAC address.
: Displays the corresponding port number of the MAC address.
: Displays the Type of the MAC address.
: Displays the Aging Status of the MAC address.
To Next Page
Loading...
Need help?
General