4.2 Main Menu Overview 32
4.3 LCD Menu Overview 32
5 View Status Options 35
5.1 View Active Alarms 37
5.1.1 Active Alarms 37
5.2 View Alarm Log 38
5.2.1 Alarm Log 38
5.2.2 Backing Up the Alarm Log (Service Terminal Interface only) 39
5.3 View Event Log 39
5.3.1 Event Log 39
5.3.2 Backing Up the Event Log (Service Terminal Interface only) 40
5.4 View Trend Log 41
5.4.1 Select a Sensor 41
5.4.2 View a Trend Log 41
5.4.3 Backing Up the Trend Log (Service Terminal Interface only) 42
5.5 View Input Status 42
5.5.1 Input Status 42
5.6 View Output Status 43
5.6.1 Output Status 43
5.7 View Pager Numbers 45
5.7.1 Select a Pager 45
5.7.2 View a Pager Number 45
5.7.3 View a Pager PIN 45
5.8 View Operation 46
5.8.1 Select a Zone 46
5.8.2 View Operation 46
5.9 View Control Status 47
5.9.1 Control Status 47
6 Silence Alarm & Backup Log Files (Service Terminal Interface) 49
6.1 Silence Alarm (Service Terminal Interface) 49
6.2 Back Up Log Files (Service Terminal Interface only) 50
7 System and Control Options 53
7.1 Login 53
7.2 Setup System - Overview 56
7.3 Setup System - Setup Inputs 56
7.3.1 Change Label (Name of Input) 57
7.3.2 Define Input as Normally Open or Normally Closed 58
7.3.3 Define Input as Alarmable or Event 58
7.3.4 Set Up Alarmable Inputs in Latched or Unlatched Mode 59
7.3.5 Set Up Delay Time 59
7.4 Setup System - Setup Common Alarm 60
7.5 Setup System - Setup Sensor 60
Vertiv | Liebert® AC8 User Manual | iv
To Next Page
Loading...
