WAGO 750 Series User Manual

72 • Board Support Package (BSP)
Web-Based Management (WBM)
WAGO-I/O-SYSTEM 750
Linux Fieldbus Coupler
• FWL version
Version of the implemented firmware loader
• Serial number
Wago serial number
Network details
• MAC address
MAC address of the Linux fieldbus coupler
• IP address
The IP address which is currently used or assigned

WAGO 750 Series Specifications

General

Protection Class	IP20
Bus Couplers	PROFIBUS, CANopen, Ethernet
Modules	Digital Input, Digital Output, Analog Input, Analog Output
Mounting	DIN rail mounting
Voltage Supply	24 V DC (typical)
Communication Protocol	Depends on the bus coupler (e.g., PROFIBUS, CANopen, DeviceNet, Ethernet)
Digital Input Channels	Varies by module (e.g., 8, 16 channels)
Digital Output Channels	Varies by module (e.g., 8, 16 channels)
Analog Input Channels	Varies by module (e.g., 2, 4, 8 channels)
Analog Output Channels	1, 2, 4 channels (depending on module)
Width	12 mm, 24 mm (typical module widths)
Number of Channels	Varies by module type
Current Consumption per Channel	Varies by module type