WAGO 750 Series User Manual

Board Support Package (BSP) • 73
Web-Based Management (WBM)
WAGO-I/O-SYSTEM 750
Linux Fieldbus Coupler
On the TCP/IP configuration page you have the opportunity to change relevant
parameters of the Ethernet configuration:
Fig. 4-3: Upper screen view "TCP/IP configuration" p086006d
DNS
• Name server 1
IP address of the first name server in the network
• Name server 2
IP address of the second name server in the network
• Hostname
Name of the Linux fieldbus coupler in the dynamic network (DHCP,
BootP)
• Default Search Domain
Name of the local domain
You require the local domain name if you want the Linux coupler to access
other network participants via the DNS server using short network names. For
example: ping pc1234 would not work since the complete name is
pc1234.localdomain
. If one or several "Default Search Domains" are
entered, the address pc1234 will automatically change to
pc1234.localdomain.

WAGO 750 Series Specifications

General

Protection Class	IP20
Bus Couplers	PROFIBUS, CANopen, Ethernet
Modules	Digital Input, Digital Output, Analog Input, Analog Output
Mounting	DIN rail mounting
Voltage Supply	24 V DC (typical)
Communication Protocol	Depends on the bus coupler (e.g., PROFIBUS, CANopen, DeviceNet, Ethernet)
Digital Input Channels	Varies by module (e.g., 8, 16 channels)
Digital Output Channels	Varies by module (e.g., 8, 16 channels)
Analog Input Channels	Varies by module (e.g., 2, 4, 8 channels)
Analog Output Channels	1, 2, 4 channels (depending on module)
Width	12 mm, 24 mm (typical module widths)
Number of Channels	Varies by module type
Current Consumption per Channel	Varies by module type