PROFINET IO-Gateway
Wieland Electric GmbH | BA000970 | 11/2016 (Rev. F)
The SP-COP2-ENI module supports the I&M information defined in the PROFINET IO specifica-
tion. The following I&M information can be read out:
Table 31: Readable I&M information
MANUFACTURER_ID
2 bytes 397 = 0x18D 0 SP-COP2-ENI
ORDER_ID (Order ID) 64 bytes "R1.190.1310.0 + 51 blank spaces and
"R1.190.1320.0 " + 51 blank spaces
0 SP-COP2-ENI
SERIAL_NUMBER
8 bytes "16010001" to "99129999" 0 SP-COP2-ENI
HARDWARE_REVISION
2 bytes 101 to 9999 0 SP-COP2-ENI
SOFTWARE_REVISION
6 to 9 Bytes "V0.1.0" to "V99.99.99" 0 SP-COP2-ENI
REV_COUNTER
2 bytes 0 to 65535 0 SD card
PROFILE_ID
2 bytes 0x0000 (Non-profile) 0 SP-COP2-ENI
PROFILE_SPECIFIC_TYPE
(IM_Profile_Specific_Type)
2 bytes 0x0003 (IO modules) 0 SP-COP2-ENI
IM_SUPPORTED
2 bytes 10 (= 0b1010) 0 SP-COP2-ENI
INSTALLATION_DATE
16 bytes 2 SD card
1)
DESCRIPTOR
54 bytes 54 Byte à 0x00..0xFF 3 SD card
1)