Operation
0110−1/A1
Winterthur Gas & Diesel Ltd.
3/ 3
40) Close the ball valve.
41) In the LDU−20 MAIN page (on the local control panel), get the USER
PARAMETERS page.
42) Select the tab SLOW TURN. The engine will slowly turn one time (see Slow
Turning 0220−1, paragraph 3).
43) Make sure that at the location where you want to start the engine, the related
LDU−20 has control (e.g. the control room or the local control panel.
44) Tell personnel on the bridge that the engine is prepared for operation.
Prepare for Engine Start after a Short Shut-down Period (One or More Days)
2015-03
To Next Page
Loading...
