WinGD X72 - Page 8

4/7 16/11/2017
Summary for Operation Manual (OM)
Page No. Title Subject
Date No.
new
exch.
Manual
Modification Service
Engine Documentation
X72
Modification
Page or
0250-2/A1 2015-12
EAAD086282
see also
Circular to
Licensees
7415 and
7415-1
Operating Data Sheet -
Alarms and Safeguards
Crosshead bearing oil (high pressure):
New data for PT2021A added for different CMCR speed
ranges (additional crosshead lubricating pump);
Note 15 and Note 16 added;
x
0410-1/A1 2015-12
Service
Bulletin
RT-
161_Issue2
Running-in New Cylinder
Liners and Piston Rings
Data about running-in procedure removed, related to the
new data in the Service Bulletin RT-161_Issue2;
Additional data about feed rate adjustments added;
x
0720-1/A1 2015-12
EAAD085894
Operating Media - Fuel
Treatment and Fuel
System
Fig. 1: Schematic Diagram - Fuel System updated;
Key to Fig. 1: Items 31, 32, 33 added;
para 4: data about additional leakage collection tank
added;
x
0750-1/A1 2015-12
Service
Bulletins
RT-
161_Issue2
Operating Media -
Lubricating Oils
document: style changed, minor text changes;
para 2.1: data about automatic filter removed;
table 3: data updated;
para 2.3.1: recommend limits for particle count updated;
para 3.1: data updated related to the changes in Fig. 1;
Fig. 1: data updated;
para 3.2: data updated;
Fig. 2: new operating areas defined;
para 3.4: Caution moved to the beginning of the paragraph;
x
4002−1/A1 2015-12
Software
update;
Review
(Automation
department);
Engine Control System
UNIC
Document reviewed;
Fig. 2: Illustration updated; Exhv. Ctrl Vlv Cyl#1 CV740nA
changed to Exhv. Ctrl Vlv Cyl#n CV740nC
para 2.3: Remark added;
para 3.6: New section added (Angle Determination
Algorithm);
para 3.7.2: text changed;
Fig. 8: Illustration updated;
para 5.1: text changed;
x
4002−2/A1 2015-12
Software
update;
Review
(Automation
department);
Local Control Panel /
Local Display Unit
(LDU−20)
Document reviewed;
Structure of the document changed;
para 2.2: Reference about control transfer added;
Fig. 3 and Fig. 5: Illustration updated;
para 3.3: Item 33 text added;
Fig. 6: Illustration updated;
New paragraph 3.5 added: Fuel System;
para 3.6: Illustration updated; table entries added;
para 3.5: Illustration updated; table text changed;
para 3.8: Illustration updated; table text changed;
para 3.9: Illustration updated; table text changed;
para 3.10: Illustration updated; table text changed, table
entries added;
para 3.10.1: ADA Start from the LDU
‐
20 Local Control
Panel or LDU
‐
20 ECR added;
para 3.11: Illustration updated; table text changed, table
entries added;
para 3.12: Illustration updated; table text changed, table
entries added;
para 3.13: Paragraph added (Crank Angle);
para 3.14: Illustration updated;
para 3.17.1: Note added;
para 3.21: Note added;
x