WinGD X72 - Page 7

3/7 16/11/2017
Summary for Operation Manual (OM)
Page No. Title Subject
Date No.
new
exch.
Manual
Modification Service
Engine Documentation
X72
Modification
Page or
4003-1/A1 2015-03
Engine Control
Updated with latest data, general minor changes;
paragraphs 4.1 and 4.6: data about hydraulic pump unit
Tool 94845 removed;
Table 1: updated with latest data;
x
4003-2/A0 2015-03
Designations
paragraph 6: CV7013C and CV7014C name changed to
solenoid valve
x
4003-2/A1 2015-03 EAAD085710 Control Diagram Control Diagram change to Revision C x
4325-1/A1 2015-03
Shut-off Valve Starting
Air
CV7013C and CV7014C name changed to solenoid valve x
4605-1/A1 2015-03 EAAD085778 Control Air Supply Fig. 1 replaced with updated version x
4605-1/A2 2015-03
EAAD085778 Control Air Supply
Fig. 1 replaced, Air Tank position is different for engines
with ELBA installed
x
6420-1/A1 2015-03 Scavenge Air Receiver
Positon numbers and designations changed; x
6545-1/A1 2015-03
Auxiliary Blower and
Switch Box
para 1.1: Note added (auxiliary blower out of service for a
long period);
x
6606-1/A1 2015-03
Scavenge Air Cooler -
Operating Instructions
and Cleaning
page 4: procedure changed x
6735-1/A1 2015-03 EAAD085647 Scavenge Air Waste
Gate
Pge 2 - Illustration change. Pge 3 - data changes in Table
1 and Table 2. Pge 4 - Pressure Check procedure changed
x
7218-1/A1 2015-03 EAAD084716 Cylinder Lubrication
Minor changes in the text;
Fig. 3 new illustration (Pos. 3 added);
New document structure;
para 3.1: data related to PT3124A changed;
x
7218-2/A1 2015-03
EAAD085313
E and
EAAD085141
E
Cylinder Lubrication -
LFR and HFR Bushes
Update of the document structure;
Fig. 1, view I replaced with updated version;
x
7218-3/A3 2015-03 Feed Rate - Adjustment
Minor text changes; Data about Wärtsilä Service
Switzerland Ltd added;
x
8016-1/A1 2015-03 Lubricating Oil System
Paragraph 5.1: data about hydraulic pump unit Tool 94845
removed;
Fig. 2: Item 28 servo oil service pump added;
x
8825-1/A1
2015-03 EAAD085176 Electrical Trace Heating
para 2.3: minor changes in the text;
Page 5: Fig. 3 updated. New position of terminal boxes
(E89.0X);
x
Date of publication 2015-06-02
0020-1/A1 2015-12 Table of Contents New document 7722-1/A1 added; x
0030-1/A1 2015-12 Subject Index New document 7722-1/A1 added; x
0035-1/A1 2015-12 Abbreviations Abbreviations added;
0210/1-A1 2015-12
Safety Precautions and
Warnings (General Data)
paragraph 13: Warning text changed, Note added; x
0250-1/A1 2015-12
EAAD086282
see also
Circular to
Licensees
7415 and
7415-1
Operating Data Sheet -
Pressure and
Temperature Ranges
Crosshead bearing (high pressure):
min./max. value for different CMCR speed ranges added
(additional crosshead lubricating pump);
Piston cooling oil (high pressure): entry removed;
Note 5 added;
x