WinGD X92 - Page 121

Maintenance
1132−2/A2
Winterthur Gas & Diesel Ltd.
5/ 19
20) Put the chain of the manual
ratchet (H1) through the roller support
94117, see Fig. 4.
21) Attach the manual ratchet (H1) to the
lug (94116C) on the bearing cover (1).
CAUTION
Damage Hazard: Use the
roller support (94117) only
as shown on its Warning
plate. The maximum
permitted load is 16000 N
at 45° .
22) Operate the manual ratchet (H1) to lift
the bearing cover (1), see Fig. 5.
23) Attach the eye bolt (94045−M56) to the
cylinder block.
24) Attach the shackle (94019K) to the lug
(94116C) on the bearing cover (1).
25) Attach the the chain block (H4) to the
eye bolt (94045-M56) and the bearing
cover (1).
26) Apply tension to the chain block (H4).
27) Remove the manual ratchet (H1).
2016
Removal and Fitting of a Main Bearing
Fig. 5
Fig. 4
H1
94117
1
94116C
1
94045−M56
94019K
94116C
H1
WCH03782
WCH03014
H1
H4