1126700 SmartPAC 2 User Manual
4-16 Initialization Mode
This item, which appears on the Main Initialization Menu only when ProCamPAC is installed,
allows you to make settings for selected cam channels that apply to all tools programmed on
your SmartPAC 2. These cam channels are called “global” cams; they are used to program
events that remain the same on all tools. The global cam feature eliminates the need to
program the same cam information for multiple tools and ensures that the cam always
operates in the same way.
To program a global cam, do the following:
1. Select SET GLOBAL CAMS on the Main Initialization Menu. The Global Cams menu,
shown in Figure 4-11, displays. An asterisk (*) indicates the channels that are already
programmed as global cams.
2. Select the cam you want to program. The Global Cam Timing Type screen, shown in
Figure 4-12, page 4-17 displays.
If you want to name the cam channel, do so before you program it as a global cam. Enter the cam
name as instructed in SELECT CAM NAMES (Optional), page 4-10.
Figure 4-11. Global Cams Menu
Asterisk (*) Indicates Global Cams
To Next Page
Loading...
Need help?
General
