SmartPAC 2 User Manual 1126700
Initialization Mode 4-37
After you enter settings on the Network Setup Utility screen, you use SmartView to complete
setting up the e-mail messages and recipients for your SmartPAC 2 (see Appendix C).
CHANGE NETWORK SETTINGS
(INITIALIZATION – SETUP NETWORK – CHANGE NETWORK SETTINGS)
This item is to be used only by your Information Technology or Information Systems person.
Call Wintriss Tech. Support for assistance in making advanced network settings.
Table 4-6. Setup E-mail Items
Item Description Examples
Mail Server
The name or IP address of the SMTP mail
server on your network
server.yourcompany.com
124.15.62.53
Mail Port
The port on the server used for mail.
Usually 25.
25
Use Secure
Login
Indicates whether a username and
password are required to log in to the
network
TRUE = Password required
FALSE = No password required
If the setting is “FALSE,” you don’t need to
enter a username or password.
FALSE
TRUE
Username
The username (if necessary) for logging in
to the network
username
joe_user
Password
The password (if necessary) for logging in
to the network
password
secret452
Email Error
Recipient
The e-mail address to which messages
issued when an e-mail fails to be delivered
are sent. SmartPAC 2 cannot receive
e-mail.
ErrorRecipient
@yourcompany.com
joe.user@yourcompany.com
E-mail From
Name
Name to be shown in the “From” field in the
e-mail header. Some networks require a
particular format of “From” name.
FromRecipient
@yourcompany.com
Press_14@yourcompany.com
Wintriss E-
mail Addr
The e-mail address of Wintriss Tech.
Support. Use the default unless instructed
otherwise.
info@wintriss.com
SETTING STATIC IP ADDRESS
SmartPAC 2 comes from the factory set up for a Dynamic Host Configuration Protocol (DHCP)
network, which automatically assigns IP addresses. If your network requires static IP addresses,
have the person who supports your network call Wintriss Tech. Support for assistance in setting up
SmartPAC 2 with a static IP address.
To Next Page
Loading...
Need help?
General
