January 2010
2-382
Phaser 7760 Color Laser Printer
OF 7-1, OF 10-1
Revised
Status Indicator RAP’s
OF 7-1 Paper Trays
A paper tray problem occurs without a status or fault code.
Procedure
Ensure the protective shield is removed from the rear of the paper trays in the 3 Tray Module or
Tandem Tray Module.
NOTE: The shield protects the paper size actuators during shipping.
OF 10-1 No Printer Top Tray Offset
Sets are not offset in Printer Top Tray.
Procedure
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools >
Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diag-
nostics > OK. Perform the Offset Motor test.
YN
Check the circuit of the Offset Motor (Figure 1).
Repair the offset components as required (PL 2.11).
Figure 1 OF 10-1 Offset Motor