How do I remove a paper jam under the top output tray of my Xerox Phaser 7760?
To remove a paper jam under the top output tray of your Xerox Printer, open the top output tray. Remove any jammed paper, making sure that all paper fragments are removed. Close the top output tray.
How to clear a paper jam in the duplex unit of a Xerox Phaser 7760 Printer?
To clear a paper jam in the duplex unit of your Xerox Printer, open Tray 1 (MPT). Then, open Left Door D. Remove the jammed paper and close Left Door D.
What to do if the finisher stacker output tray is jammed on my Xerox Printer?
If the finisher stacker output tray is jammed on your Xerox Printer, pull the jammed paper out of the stacker output tray. Open the finisher door, and then close the finisher door.
How do I fix a paper jam at the finisher cover of my Xerox Phaser 7760?
To fix a paper jam at the finisher cover of your Xerox Printer, lift the finisher cover (Door 5). Remove the jammed paper and then close the finisher cover (Door 5).
General| Print Technology | Laser |
|---|---|
| Print Speed (Color) | 35 ppm |
| Print Speed (Black) | 35 ppm |
| Monthly Duty Cycle | 150, 000 pages |
| Processor | 400 MHz |
| Memory (Standard) | 256 MB |
| First Page Out Time (Color) | 9 seconds |
| Printer Type | Color Laser Printer |
| Connectivity | USB, Ethernet |
| Operating Systems Supported | Windows, Mac, Linux |
| Warm-up Time | 60 seconds |
| Print Speed | 35 ppm |
| Memory | 256 MB |
| Memory (Maximum) | 1 GB |
To Next Page