Item Number Name
Description
5 Machine Status button Use this button to access the Device Information, Faults,
Supplies, Billing Information, and Tools feature which
include the press configuration, the software version, the
press billing meters and counter information, and print
job history or error reports.
6 Log In / Out button Use to log in and out of Administrator mode or
Authentication mode with user ID and password.
7 Power Saver button Use this button if the press is inactive and the touch
screen is dark, or the press is in Power Saver mode. This
button manually exits the press from Power Saver mode;
it does not place the press in Power Saver mode.
8 Clear All button Use this button to return all selections to the same state
as when the press was powered on. Press once to clear a
current entry. Press twice to return to default settings.
9 Stop button Press to stop and pause the print or copy job in progress.
10 Start button Use this button to perform certain functions, such as
scanning and copying a document or printing a selected
report from the print engine. This button is also used by
the Customer Service Engineer (CSE) during diagnostic
routine procedures.
11 Interrupt button Use this button to suspend a copy or print job in
progress and have the press stop to process another job.
During the Interrupt mode, the Interrupt button lights.
Pressing the Interrupt button again exits the Interrupt
mode and resumes the suspended job.
12 Numeric Keypad Use to enter alphanumeric characters. The C (Cancel)
Entry cancels the previous entry made on the numeric
keypad.
13 Language button Use to select a different language for the touch screen
options.
14 Help button Displays the Help System, this feature may not be
available in all marketplaces.
Features
Login
There are two login levels:
• Guest/Operator: This is the default login user. You are automatically logged on as Guest.
• Administrator: This login level is required to customize the system and network defaults for your
press and to customize print jobs by setting or changing the parameters for certain features. Press
the Guest button (or the Log in button on the User Interface) to access the Login screen.
14
To Next Page
Loading...
