Xerox Versant 280 Press - Production Ready (PR) Finishers

Item
Specification
Paper weight 60–105 g/m
2
, uncoated
Trifold (C or Z)
Paper size 8.5 x 11 in. (Letter)
A4
Paper weight 60–105 g/m
2
, uncoated
Tray capacity 30 sheets
Note: Values are based on Colotech+90.
PPrroodduuccttiioonn RReeaaddyy ((PPRR)) FFiinniisshheerrss
Note: These optional finishing devices require the Interface Decurler Module.
Three Production Ready (PR) Finishers are available with your press.
• Product Ready (PR) Finisher
• Product Ready (PR) Booklet Maker Finisher
• Product Ready (PR) Finisher Plus
Note: Throughout this section, the three PR Finishers are referred to simply as the Finisher.
Any differences between the finishers are distinguished by using the specific finisher name.
The Production Ready (PR) Finishers provide the following capabilities:
• Handling media that is smaller than 5.83 x 8.27 in., A5.
• Stapling up to 100 sheets with one or two staples.
• Handling large-sized paper, maximum size of 13 x 19.2 in., 330.2 x 488 mm.
• For coated stocks, stapling a maximum of 35 pages.
• For the PR Finisher Plus only: Feeding the output media from the press and any inline finishing
devices to a third-party DFA device.
Note: The optional C/Z Folder is available with all three Production Ready (PR) Finishers.
156