SSqquuaarreeFFoolldd
®®
TTrriimmmmeerr DDeevviiccee
Note: This optional finishing device requires the Interface Decurler Module.
Tip: SquareFold
®
Trimmer device is available only with a booklet maker finisher.
The SquareFold
®
Trimmer device is an optional finishing device that flattens the spine of a booklet
and performs face trim of the booklet.
The SquareFold Trimmer device:
• Receives the booklet from the booklet maker area of the finisher
• Flattens the booklet spine which reduces the booklet thickness and gives it the appearance of a
perfect-bound book
• Trims and cuts away the face edge of the booklet, resulting in a neat finished edge
The booklet area of the finisher assembly and staples booklet. The booklet enters the SquareFold
®
Trimmer device already assembled. Any adjustments to the image of the original and its placement
on the booklet page must be set at the print server.
167
To Next Page
Loading...
