Xerox Versant 280 Press - Unfused Prints or Fuser Offset

Solution
• Ensure the paper tray guides are against the edges of the loaded paper.
• Create or use an existing Alignment Profile.
• Perform the Auto Alignment Adjustment procedure. For instructions, refer to the System
Administrator Guide, Simple Image Quality (SIQA).
• Refer to the Image Registration, Perpendicularity, Skew, and Magnification.
UUnnffuusseedd PPrriinnttss oorr FFuusseerr OOffffsseett
Problem
The image is not properly fused. Dry ink/toner on print is not permanent, smears, flakes, or rubs
off.
249