Xerox Versant 280 Press - C;Z Folder; C;Z Fold Types

Item
Specification
Note: Setting a head-to-toe trimming area size of 7
mm (0.275 in.) or less can cause damage of the
trimmed edges.
CC//ZZ FFoollddeerr
The C/Z Folder is available only with one of the optional Production Ready (PR) Finishers. For more
information, refer to Production Ready (PR) Finishers.
Note: This optional finishing device requires the Interface Decurler Module.
The C/Z Folder is an optional finishing device that provides Envelope Folding (C-Fold and Z-Fold) for
8.5 x 11 in. and A4 media and large sheet folding (Half-Sheet Z-Fold) for 11 x 17 in. and A3 media.
Folded output is produced by selecting the Fold feature.
• For network print jobs, select the Fold feature from the print drive.
• For copy and scan jobs, select the Fold feature from the scanner.
Note: Copy and scan jobs are applicable only if the press includes a scanner.
• To use the Fold feature, the orientation of documents must be short-edge feed (SEF).
• Select a tray that contains SEF media.
• There are three types of folds available: C-Fold, Z-Fold, and Z-Fold Half-Sheet.
C/Z Fold Types
C-Fold
A C-Fold has two folds, which create a three-panel output.
Z-Fold
A Z-Fold has two folds that are folded in opposite directions, resulting in a type of fan fold.
153