Xerox Versant 280 Press - Trays 6 and 7 Fault Messages; Trays 6 and 7 Fault Code Information

4. Return the lever 1d to the original position.
5. Close the front cover of the OHCF.
Note: If the front cover of the OHCF is not completely closed, a message will appear and
the machine will not operate.
TTrraayyss 66 aanndd 77 FFaauulltt MMeessssaaggeess
When an fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press
stops printing and a message appears on the press UI. A graphical illustration shows the location of
the fault with a brief explanation of corrective actions for clearing the fault. If a fault occurs in more
than one location, the illustration changes to indicate the multiple locations and the required
corrective actions.
Trays 6 and 7 Fault Code Information
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press UI.
The UI also displays a Faults button which provides information about the fault and detailed
instructions for correcting the fault.
Tip: Trays 6 and 7 faults are identified by the codes which start with the three-digit number
078.
288