Xerox Versant 280 Press - Edgewear on Prints; Halo or Smudges on Prints

– Acquire the measuring tool either from www.xerox.com/VERSANT_280docs or the
Nationalization Kit.
– If spots or bands occur every 147 mm on the prints, a drum is damaged or light shocked.
– Replace or swap the appropriate drum cartridge. Refer to Replacing a Drum Cartridge.
EEddggeewweeaarr oonn PPrriinnttss
Problem
The IB and OB edges of the output prints shows dry ink/ toner deletions, density inconsistency, or is
lacking in color depth; occurs mainly when using heavier or lighter weight stock.
Solutions
If you run multiple width papers, for more information, refer to Fuser Hints and Tips and Extended
Fuser Life.
HHaalloo oorr SSmmuuddggeess oonn PPrriinnttss
Problem
The printed output contains halo or smudges on them.
246