Xerox Versant 280 Press - Trays 8 and 9 Troubleshooting; Trays 8 and 9 Paper Jams; Clearing Trays 8 and 9 Jams; Paper Jams When the Bypass is Installed on Trays 8 and 9

TTrraayyss 88 aanndd 99 TTrroouubblleesshhoooottiinngg
TTrraayyss 88 aanndd 99 PPaappeerr JJaammss
Clearing Trays 8 and 9 Jams
Nip Release levers inside of the Transport area of the Feeder hold back large size sheets (such as A3,
11 x 17 inches, 12 x 18 inches) to reduce the chance of jamming as paper enters the print engine.
Note: Follow the jam clearance instructions displayed on the touch screen. Always ensure that
all paper jams, including any small ripped pieces of paper, are cleared before proceeding with
your print jobs.
Paper Jams When the Bypass is Installed on Trays 8 and 9
Tip: Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any print jobs.
1. Remove the paper currently loaded in the Bypass (Tray 5).
2. Lift and open the Top Cover of the Bypass (Tray 5).
3. Remove any jammed paper.
Note: If paper is torn, check inside the press and remove it.
289