EasyManua.ls Logo

Xerox Versant 280 Press - Guidelines for Using the SquareFold Trimmer Device

Xerox Versant 280 Press
375 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tip: SquareFold
®
Trimmer faults are identified by the codes which start with the three-digit
number 013.
Guidelines for Using the SquareFold
®
Trimmer Device
Full-Page Images on Booklets
When using full-page images, ensure that the finished booklet size accommodates any full-page
images and that when the booklet is trimmed, these images are not truncated.
The following are examples of a booklet with preprinted front/back covers with a full-page image but
different sizes:
1. Booklet 1 is printed on 8.5 x 14 in./B4 paper: The front cover, which was trimmed, displays the
entire image.
2. Booklet 2 is printed on 8.5 x 11 in./A4 paper: The image on the front cover is truncated after
trimming it.
Booklet Considerations
Before you print any booklet, consider the following:
Image location on the original as it will no longer be centered. Do you need to shift images in
order to ensure they fit on the finished booklet?
What is the desired size of the finished booklet?
371

Table of Contents

Other manuals for Xerox Versant 280 Press

Related product manuals