1. Increase the Power Saver time to 30 minutes.
If the wait time remains too long, continue to the next step.
2. For this user requirement, to change the NVM values for 752–175 and 740–437, contact Xerox
Technical Customer Support. For more information, refer to the Xerox
®
Versant
®
280 Press
System Administrator Guide.
3. For Copy mode, on the press UI, set Output Color to Auto Detect.
The default setting is Auto Detect.
Color Copy or Color Print Jobs
Problem
For copy or print jobs that are color only, for the first copy or print output, the printing takes longer
than the expected 10 seconds.
Color Job Workflows and First Copy or Print Output Time Factors
The following workflow scenarios affect the extended wait-time for the first color copy or print
output:
• Copy or print jobs that are 1–2 pages only versus copy or print jobs that are more than 2 pages
• The number of users in the print queue
• Color copy or print jobs that use the same type of media versus copy or print jobs that contain
mixed media types
• Copy or print jobs that use only a color output
If you do not use one of these workflows, the implementation of this solution can result in color
stability issues.
Solution
To decrease the wait-time for first copy or print out, perform the following:
1. Increase the Power Saver time to 30 minutes.
If the wait time remains too long, continue to the next step.
2. For this user requirement, to change the NVM values for 752–175 and 740–437, contact your
Xerox Technical Customer Support. For more information, refer to the Xerox
®
Versant
®
280
Press System Administrator Guide.
3. For Copy mode, on the press UI, set Output Color to Auto Detect.
The default setting is Auto Detect.
RReedduucciinngg DDrryy IInnkk//TToonneerr CCoonnssuummppttiioonn
Problem
In order to maintain image quality (IQ), the press enters Adjust Image Quality mode. In this
mode, dry ink/toner is consumed in the form of dry ink/toner bands and process control patches
being laid down. Frequency of image quality adjustment is dependent on many factors including
area coverage. While printing jobs of low area coverage or low image density, the frequency of
image quality adjustment can be greater.
238
To Next Page
Loading...
