Production Ready (PR) Finisher Plus
The Production Ready (PR) Finisher Plus consist of:
• Two output trays: Top Tray and Stacker Tray
• Stapler
• Optional Basic Punch
The Production Ready (PR) Finisher Plus serves as an interface to transfer paper between the press
and any third-party, Document Finishing Architecture (DFA) device attached to the press.
Finisher Components
1. Paper Jam and Error Indicator
2. Top Tray
3. Stacker Tray
4. Booklet Tray*
5. Booklet Output Button*
6. Front Cover
7. Staple Waste Container
8. Basic Staple Cartridge for Side Stitch
158
To Next Page
Loading...
