4. Return unit 4 to its original position.
5. Close the front door of the Business Ready Finisher.
Clearing Jams in the Booklet Tray
1. Open the front door of the Business Ready Finisher.
2. To release the jammed paper, turn green knob 4 in the direction shown.
3. To remove the paper, pull it in the direction shown.
Note: If the paper is torn, remove all torn pieces from the finisher.
4. Close the front door of the Business Ready Finisher.
BR Finisher Fault Messages and Fault Codes
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press UI. A graphical illustration shows the location of the
fault with a brief explanation of corrective actions for clearing the fault. If a fault occurs in more than
one location, the illustration changes to indicate the multiple locations and the required corrective
actions.
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press UI.
The UI also displays a Faults button which provides information about the fault and detailed
instructions for correcting the fault.
Tip: BR Finisher and Booklet Maker faults are identified by the codes which start with the three-
digit number 012.
299
To Next Page
Loading...
