3. Carefully remove the paper.
Note: If the paper is torn, remove all pieces from the finisher.
4. Return green lever 3d to its original position.
5. Close the front door of the Business Ready Finisher.
Clearing Jams in the BR Finisher at Position 4
1. Open the front door of the Business Ready Finisher.
2. Using the green handle, pull out unit 4until it stops.
3. To remove the jammed paper, turn green knob 4 in either direction as shown.
Note: If the paper is torn, remove all torn pieces from the finisher.
298
To Next Page
Loading...
