RReeppllaacciinngg CCoonnssuummaabbllee SSuupppplliieess
The following items are the Customer Replaceable Units (CRU) for the press. It is recommended that
you have a supply of these items available to eliminate down time when they need to be replaced.
• Dry Ink/Toner cartridges (C, M, Y, K)
• Drum cartridges (C, M, Y, K)
• An empty Waste Dry Ink/Toner bottle
• Suction Filter
Refer to www.xerox.com for the latest consumable part numbers.
Note: The Fuser Module may be replaced by the customer only if directed to do so by Service.
Note: Store supply items and Xerox parts in their original packages in a convenient location.
Always recycle/dispose the used CRU according to the disposal instructions supplied with the
new CRU.
Ordering Supplies
Xerox supplies, paper, and throughput material can be ordered from the web site www.xerox.com and
clicking on the Supplies link. For any item that is not orderable from the web site, contact your Xerox
Service Representative.
Note: The cleaning pads used with the ROS Window cleaning wand are not orderable. Contact
your Xerox representative for any additional cleaning pads.
CRUs (Supply Item) Reorder Quantity
Approximate Print Yield (Full
Color 8.5x11/A4 Prints)
Black Dry Ink/Toner Cartridge 1 per box, 2 per press 50,000
Cyan Dry Ink/Toner Cartridge 1 per box 55,000
Magenta Dry Ink/Toner Cartridge 1 per box 51,000
Yellow Dry Ink/Toner Cartridge 1 per box 51,000
Waste Dry Ink/Toner Bottle 1 45,000
Suction Filter 1 200,000
Drum Cartridge (R1) 1 per box 348,000
Drum Cartridge (R2) 1 per box 348,000
Drum Cartridge (R3) 1 per box 348,000
Drum Cartridge (R4) 1 per box 348,000
OHCF Feed Roll Kit 1 kit 500,000
Standard Finisher Staple Cartridge and
Staple Waste Container
4 Staple Cartridges (5,000
staples per cartridge) and 1
Staple Waste Container per
carton
5,000 staples each cartridge
Booklet Maker Finisher Staple Cartridge 4 pack: 5,000 staple refills
each
5,000 staples each cartridge
191
To Next Page
Loading...
