• PR Booklet Maker Finisher
• PR Finisher Plus
• SquareFold
®
Trimmer device. This device requires the PR Booklet Maker Finisher
• Plockmatic
®
Pro 35 and Plockmatic
®
Pro 50. This device requires the PR Finisher Plus
PPrriinntt SSeerrvveerr OOvveerrvviieeww
The print server networked with your press accepts, processes, and manages document files for job
submission to the press.
One of the following print servers can be used with your press:
• Xerox
®
EX 280 Print Server, Powered by Fiery
®
• Xerox
®
EX-i 280 Print Server, Powered by Fiery
®
Note: For detailed information on your specific print server, refer to the customer
documentation that was delivered with it. Documentation may also be downloaded from www.
xerox.com by searching for the press and selecting the Support link.
SSppeecciiffiiccaattiioonnss
Rated Speed
Full color or black only: 80 pages per minute of Letter (8.5 x 11 in.), A4 paper size
Print Modes
Two print modes are supported and are specified at the print server:
• 4 Color Mode (CMYK)
• Black and White Mode (Grayscale)
Maximum Printable Area
• Default Border: 4 mm on the leading edge and 2 mm on the remaining sides
• For Trays 1–3, 6, 7, and Tray 5 (Bypass):
– 323 x 482 mm (12.72 x 18.98 in.) before adjustment
– 326 x 482 mm (12.83 x 18.98 in.) after adjustment
• For Tray 5 (Bypass), Extra Long Sheet:
– 323 x 654 mm (12.72 x 25.75 in.) before adjustment, when connected to the optional
Oversized High Capacity Feeder
– 326 x 654 mm (12.83 x 25.75 in.) after adjustment, when connected to the optional
Oversized High Capacity Feeder
• Image Quality Assurance Area:
18
To Next Page
Loading...
