3. Select Copy on the Home window.
4. Select the Output Format tab.
a. Select the DFA Finisher.
The DFA Finisher Profile screen displays.
b. From the displayed list, select the profile for the job.
If the device is an e-binder, select the binding position.
c. Select Save.
d. Select the desired Face Up/Down Output option.
5. Select the desired Copy features/options.
The features displayed on the main Copy window vary depending on how it is configured by the
administrator.
6. Enter the quantity.
7. Press Start.
If prompted on the UI, follow the instructions provided to correct any job submission errors. If
there is a DFA problem, refer to your DFA documentation.
Copy Feature
Copy Feature Overview
Tip: Depending on how the Copy tab is configured by the administrator, this tab may contain
different features than the ones listed here.
The Copy feature includes the following options:
• Reduce/Enlarge (R/E)
• Paper Supply (Auto Select)
• Output Color
• Copy Output
• 2 Sided Copying
• Original Type
• Darken/Lighten
Reduce/Enlarge
Reduce and Enlarge
The reduce/enlarge (R/E) feature provides a variety of reduction and enlargement options to adjust
the size of the output image. Originals can be enlarged or reduced from 25-400%. Various automatic
and preset selections are available to help you choose the most common reductions or enlargements,
while a custom setting enables you to select the ratio that suits your requirements. Basic reduction/
enlargement options include:
100% or R/E entry box
The default setting in the R/E entry box is 100%. This selection produces an image on your copy
exactly the same size as the image on your original document.
You can also set the R/E ratio by using the plus or minus buttons. In this case, the ratio is displayed
in the R/E entry box.
41
To Next Page
Loading...
