9. Enter the quantity.
10. Press Start on the UI.
Booklet Creation
Booklet Creation allows you to create multi-page booklets from an ordered set of 1-Sided or 2-Sided
originals.
Refer to the following tips when using the Booklet Creation feature:
• When Auto% is selected, the press reduces or enlarges the image as required.
• Any other Reduce/Enlarge selection could result in image loss.
• When Booklet Creation is selected, the output is automatically set to 1-2 Sided.
• Ensure that the Original Orientation setting reflects the same orientation as that of the original
documents.
Booklet Creation Options
When On is selected, the following Booklet Creation options are available:
Original Input
• 1 Sided Originals
• 2 Sided Originals
• 2 Sided Rotated Originals
Binding Shift
Use this option to set the booklet binding-shift value within the range from 0 to 1.9 in. (0 to 50
mm) in 0.1 in. or 1 mm increments.
Covers
This option allows you to attach covers to the booklet. The front and back covers can be output
before the first page and after the last page of the document and on a different type of paper.
Divide Output
Use this option when you have a large number of original documents. The original documents are
divided to create subsets in order to reduce the thickness of each booklet. The press folds copies in
half and piles them up to form a booklet. The Light Production C Finisher with Booklet Maker
allows you to specify the number of sheets within the range of 1-50 sheets in one-sheet
increments.
Output/Offset
This option is available only when specific optional finishers are attached, such as the Standard
Finisher or Booklet Maker Finisher.
Auto Image Positioning
This option adjusts the image position so that the printing position from the edge of each page
remains consistent between the inner and outer pages of the booklet. Auto Image Positioning is
available for selection if you have already selected Create Left/Top Bound Booklet or Create
Right Bound Booklet.
54
To Next Page
Loading...
