Xerox Versant 80 Press - Page 175

Recommended solutionPossible causeFault codeFault Area
Check print options and spe-
cify the print data again. If
the hard disk is malfunction-
ing, contact your Xerox Cus-
tomer Support Center.
Delayed print documents
cannot be registered.
016-710
Increase resolution or scan
area size.
The machine is unable to
process size, because the
specified document area is
too small.
016-712
Perform one of the following:
• When printing by auto-
matic tray selection, set
one of the paper types to
a setting other than
Automatic Tray Switch-
ing > Off in Paper Type
Priority.
• Check print data.
An error occurred during
print processing. Probable
causes are as follows:
• Printing was instructed
by automatic tray selec-
tion when Paper Type
Priority is set to Auto-
matic Tray Switching >
Off for all paper in the
Common Service Set-
tings.
• ESC/P command error
016-721
Retry printing after waiting
for a period.
Attempted to print Job
Template List while updat-
ing the job template.
016-735
Specify the printable paper
size for booklet creation.
Booklet Creation is not ap-
plied to the specified paper.
016-738
Specify the combination of
the printable document and
paper size for booklet cre-
ation.
The specified document and
paper size are an unauthor-
ized combination.
016-739
Specify the printable paper
tray for booklet creation.
Booklet Creation is not ap-
plied to the specified paper
tray.
016-740
Reduce the number of pages
of print data, for example, by
dividing up the print data or
printing one copy at a time
when making multiple copies.
Printing is not possible due
to insufficient hard disk
space.
016-748
Cancel the printing prohibited
specification using Adobe
Reader, and try to print again.
Attempted to process PDF
file which was specified to
printing prohibited.
016-755
14-13Xerox
®
Versant
®
80 Press
User Guide
Press Problem Solving