Xerox Versant 80 Press - Page 179

Recommended solutionPossible causeFault codeFault Area
Contact your Xerox Customer
Support Center.
An error occurred with the
machine.
065-210General
Power-cycle the machine. If
the machine is not improved
by performing the relevant
remedy, contact your Xerox
Customer Support Center.
An error occurred in the
document feeder.
065-215, 065-
216, 065-219
Document Feeder
Check accepted paper is
loaded correctly in trays, clear
any paper jams, and com-
pletely close all trays, drawers
and doors on press.
Incorrect paper positioning,
Entrance area paper jam
faults, Paper tray faults, Pa-
per path sensor faults, Open
drawer faults, Open door
interlock faults
071-1[00-99],
071-2[00-99],
072-1[00-99],
072-2[00-99],
073-1[00-99],
073-2[00-99],
075-1[00-99],
075-2[00-99],
075-3[00-99],
075-6[00-99],
076-1[00-99],
076-2[00-99],
076-3[00-99],
077-1[00-99],
077-2[00-99],
077-3[00-99],
077-4[00-99],
077-6[00-99],
077-9[00-99],
078-1[00-99],
078-2[00-99],
078-3[00-99],
078-4[00-99],
078-6[00-99],
078-9[00-99]
Paper Handling /
Transport
Power Off/On the press.
If error persists, contact the
Customer Support Center.
089-313, 089-
314, 089-316,
089-317
Registration
Reseat the Drum Cartridge;
For 091-324 to 091-327, re-
place the Drum Cartridge.
Erase Lamp faults; Drum
Cartridge not set correctly
091-323 to
091-327, 091-
4[00-99] to
091-9[00-99]
Xerographic Clean-
ing
Reposition the waste bottle,
order a new waste bottle, and
replace when full.
Waste Toner Bottle Near
Full
091-400
14-17Xerox
®
Versant
®
80 Press
User Guide
Press Problem Solving