YASKAWA L1000A - Three-Phase 200 V Class Drives

5.1 A: Initialization
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual 163
Parameter Details
5
Table 5.3 Check to see if A1-02 is locked (continuing from step 10 above)
4.
Select the flashing digits by pressing , or .
5.
Select A1-04 by pressing .
6.
Press while holding down at the same time. A1-05 will appear.
Note: Because A1-05 is hidden, it will not be displayed by simply pressing .
“05” flashes
7.
Press .
8.
Use , , , and to enter the password.
9.
Press to save what was entered.
10. The display automatically returns to the display shown in step 5.
Step Display/Result
1.
Press to display A1-02.
“02” flashes
2.
Press to make sure that the setting values cannot be selected.
––
3.
Press to return to the first display.
Step Display/Result
F1
left
F2
right
←→
-PRMSET-
Select Language
English
PRG
FWD
A1-00=0 ∗0∗
←→
-PRMSET-
A1- 04 = 0
(0~9999)
“0”
PRG
Enter Password
FWD
←→
-PRMSET-
A1- 05 = 04
(0~9999)
“0”
PRG
Select Password
FWD
←→
-PRMSET-
A1- 05 = 0000
(0~9999)
“0”
PRG
Select Password
FWD
F1
left
F2
right
←→
-PRMSET-
A1-05= 1234
(0~9999)
“0”
PRG
Select Password
FWD
Entry Accepted
←→
-PRMSET-
A1- 05 = 1234
(0~9999)
“0”
PRG
Select Password
FWD
←→
-PRMSET- PRG
Control Method
FWD
A1-02= 2
∗2∗
Open Loop Vector
HELP
- MODE - PRG
DATA
Programming
FWD
SIEP_C710616_38F_5_0.book 163 ページ ２０１５年１１月９日 月曜日 午後３時３６分