YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual 3
information contained in this manual is subject to change without notice. Every precaution has been taken in
the preparation of this manual. Nevertheless, Yaskawa assumes no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting from the use of the information contained in this
publication.
◆ Quick Reference
Drive a Synchronous PM Motor
L1000A can operate synchronous PM motors. Refer to Flowchart C: Auto-Tuning for PM Motors on page 110.
Perform Auto-Tuning
Automatic tuning sets motor parameters. Refer to Types of Auto-Tuning on page 112.
Maintenance Check Using Drive Monitors
Use drive monitors to check fans, capacitors, and other components may require maintenance. Refer to Performance Life Monitors Maintenance Monitors on page 323.
Fault Display and Troubleshooting
Refer to Drive Alarms, Faults, and Errors on page 280 and Setup Troubleshooting and Possible Solutions on page 152.
Standards Compliance
Refer to European Standards on page 474 and UL and CSA Standards on page 481.
CSA B44.1 /
ASME A17.5
SIEP_C710616_38F_5_0.book 3 ページ ２０１５年１１月９日 月曜日 午後３時３６分
To Next Page
Loading...
