2.2 Mechanical Installation
46 YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Reattaching the Top Protective Cover
Tighten the screws at the four corners of the cover with a straight-edge screwdriver and then reattach the top protective
cover.
Figure 2. 8
Figure 2.8 Reattaching the Top Protective Cover
◆ Digital Operator Remote Usage
■ Remote Operation
The digital operator mounted on the drive can be removed and connected to the drive using an extension cable up to 3 m
long to facilitate operation when the drive is installed in a location where it cannot be easily accessed.
The digital operator can also be permanently mounted in remote locations such as panel doors using an extension cable
and an installation support set (depending on the installation type).
Note: Refer to Drive Options and Peripheral Devices on page 353 for information on extension cables and installation support sets.
Figure 2. 9
Figure 2.9 Communication Cable Connection
S / N : J007XE273710001
OperatorDrive
Communication Cable Connecto
Comm. Port
SIEP_C710616_38F_5_0.book 46 ページ ２０１５年１１月９日 月曜日 午後３時３６分
To Next Page
Loading...
