380 YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
A.3 Three-Phase 600 V Class Drives
A.3 Three-Phase 600 V Class Drives
Table A.3 Power Ratings (Three-Phase 600 V Class)
Item
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater
than the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> Rated motor capacity is calculated with a rated output voltage of 575 V.
<4> Carrier frequency can be set up to 3 kHz while keeping this current derating. Higher carrier frequency settings require derating.
<5> Carrier frequency can be set up to 8 kHz while keeping this current derating. Higher carrier frequency settings require derating.
<6> Carrier frequency can be set up to 5 kHz while keeping this current derating. Higher carrier frequency settings require derating.
Specification
CIMR-LU5A 0003 0004 0006 0010 0013 0017 0022 0027 0032 0041 0052 0062 0077 0099 0130 0172 0200
Maximum Applicable Motor
Capacity (HP)
<1>
2 3 5 7.5 10 15 20 25 25-30 40 50-60 50-60 75 100 125 150 250
Input
Input Current
(A)
<2>
3.6 5.1 8.3 12 16 23 31 38 33 44 54 66 80 108 129 158 228
Rated Voltage
Rated Frequency
Three-phase 500 to 600 Vac 50/60 Hz
Allowable Voltage
Fluctuation
-10 (-15) to 10%
Allowable
Frequency
Fluctuation
±5%
Input Power (kVA) 4.1 5.8 9.5 14 18 26 35 43 38 50 62 75 91 123 147 181 261
Output
Rated Output
Capacity
(kVA)
<3>
3.5
<5>
4.1
<5>
6.3
<5>
9.8
<5>
12
<5>
17
<5>
22
<5>
27
<5>
32
<5>
41
<5>
52
<5>
62
<5>
77
<6>
99
<4>
129
<4>
171
<4>
199
<4>
Rated Output
Current (A)
3.5
<5>
4.1
<5>
6.3
<5>
9.8
<5>
12.5
<5>
17
<5>
22
<5>
27
<5>
32
<5>
41
<5>
52
<5>
62
<5>
77
<6>
99
<4>
130
<4>
172
<4>
200
<4>
Overload
Tolerance
150% of rated output current for 60 s
Carrier Frequency
User adjustable between
2 and 15 kHz
User adjustable between
2 and 10 kHz
User
adjustable
between
2 and 8
kHz
User adjustable between
2 and 3 kHz
Maximum Output
Volta ge (V )
Three-phase 500 to 600 Vac (proportional to input voltage)
Maximum Output
Speed (Hz)
200 Hz (user-adjustable)
SIEP_C710616_38F_5_0.book 380 ページ 2015年11月9日 月曜日 午後3時36分