7.4 Drive Cooling Fans and Circulation Fans
326 YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
◆ Cooling Fan Component Names
WARNING! Electrical Shock Hazard. Do not connect or disconnect wiring while the power is on. Failure to comply can result in serious
personal injury. Before servicing the drive, disconnect all power to the equipment. The internal capacitor remains charged even after
the power supply is turned off. After shutting off the power, wait for at least the amount of time specified on the drive before touching
any components.
CAUTION! Burn Hazard. Do not touch a hot drive heatsink. Failure to comply could result in minor or moderate injury. Shut off the
power to the drive when replacing the cooling fan. To prevent burns, wait at least 15 minutes and ensure the heatsink has cooled down.
NOTICE: Follow cooling fan and circulation fan replacement instructions. Improper fan replacement may cause damage to equipment.
When installing the replacement fan into the drive, make sure the fan is facing upwards. Replace all fans when performing maintenance
to help ensure maximum useful product life.
Figure 7. 1
Figure 7.1 Cooling Fan Replacement
Three-Phase 600 V Class
50003 – – – –
50004 1 – –
327
50006 1 – –
50010 2 – –
50013 2 – –
50017 2 – –
50022 2 – –
50027 2 – –
50032 2 – –
329
50041 2 – –
50052 2 – –
334
50062 2 – –
50077 2 – –
50099 2 – –
50130 2 – –
50172 3 – –
50200 3 1 –
A – Fan Cover D – Cooling Fan
B – Fan finger guard E – Fan Unit Case
C – Cable Cover F – Circulation Fan
Model CIMR-LU Cooling Fans Circulation Fans Control Board Cooling Fans Page
C
E
F
D
B
A
20014 to 20075
40006 to 40039
50004 to 50027
20085, 20115
40045 to 40091
50032, 50041
20145 to 20415
40112 to 40304
50052 to 50200
D
A
D
SIEP_C710616_38F_5_0.book 326 ページ 2015年11月9日 月曜日 午後3時36分