EasyManua.ls Logo

YASKAWA L1000A - Monitor Data

YASKAWA L1000A
522 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C.9 MEMOBUS/Modbus Data Table
458 YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Monitor Data
Monitor data can be read only.
Register No. Contents
0020H
Drive Status 1
bit 0 During Run
bit 1 During Reverse
bit 2 Drive Ready
bit 3 Fault
bit 4 Data Setting Error
bit 5 Multi-Function Relay Output (terminal M1-M2)
bit 6 Multi-Function Relay Output (terminal M3-M4)
bit 7 Multi-Function Relay Output (terminal M5-M6)
bit 8 Multi-Function Photocoupler Output 1 (terminal P1-C1)
bit 9 Multi-Function Photocoupler Output 2 (terminal P2-C2)
bit A to bit D Reserved
bit E When ComRef has been enabled
bit F When ComCtrl has been enabled
0021H
Fault Contents 1
bit 0 Overcurrent (oC), Ground fault (GF)
bit 1 Overvoltage (ov)
bit 2 Drive Overload (oL2)
bit 3 Overheat 1 (oH1)
bit 4 Dynamic Braking Transistor Fault (rr)
bit 5, 6 Reserved
bit 7 EF0, EF3 to EF8: External Fault
bit 8 CPF: Hardware Fault (includes oFx)
bit 9 Motor Overload (oL1), Overtorque Detection 1/2 (oL3/oL4), Undertorque Detection 1/2 (UL3/UL4)
bit A Encoder Disconnected (PGo), Option Card Hardware Fault (PGoH), Overspeed (oS), Excessive Speed Deviation (dEv)
bit B Main Circuit Undervoltage (Uv)
bit C Undervoltage (Uv1), Control Power Supply Undervoltage (Uv2), Soft Charge Circuit Fault (Uv3)
bit D Output Phase Loss (LF), Input Phase Loss (PF)
bit E MEMOBUS/Modbus Communication Error (CE), Option Communication Error (bUS)
bit F Operator Connection Fault (oPr)
0022H
Data Link Status
bit 0 Writing data or switching motors
bit 1, 2 Reserved
bit 3 Upper or lower limit error
bit 4 Data conformity error
bit 5 Writing to EEPROM
bit 6 to bit F Reserved
0023H Speed Reference,
<1>
0024H Output Speed,
<1>
0025H Output Voltage Reference, 0.1 V units (units are determined by parameter H5-10)
0026H Output Current, 0.1 A units
0027H Output Power
0028H Torque Reference
0029H
Fault Contents 2
bit 0 Reserved
bit 1 Ground Fault (GF)
bit 2 Input Phase Loss (PF)
bit 3 Output Phase Loss (LF)
bit 4, 5 Reserved
bit 6 Motor Overheat Fault (PTC thermistor input) (oH4)
bit 7 to F Reserved
SIEP_C710616_38F_5_0.book 458 ージ 015年11月9日 月曜日 午後3時36分

Table of Contents

Other manuals for YASKAWA L1000A

Related product manuals