YASKAWA MP2100 Series User Manual

3.1 System Startup
3-33
3
4. A message will appear when the transfer has been completed. Click the OK Button.
5. The All Dump Window will be displayed. Select File – Exit.
(13) CPU RUN Settings
The procedure for starting the CPU, which was set to STOP during the flash save process, is explained below.
1. Right-click the 2100SMPL Controller Folder and select CPU Control.
2. The Controller Running Status Window will be displayed. Click RUN Button.

YASKAWA MP2100 Series Specifications

General

Brand	YASKAWA
Model	MP2100 Series
Category	Controller
Language	English