YASKAWA P1000 - Page 415

Drive Model Terminal
Recomm.
Gauge Without
Additional
Impedance
<1>
AWG, kcmil
Recomm.
Gauge With
Additional
Impedance
<2>
AWG, kcmil
Wire Range
AWG, kcmil
<3>
Screw
Size
Tightening Torque
N·m (lb.in.)
5o0242
R/L1, S/L2 3/0 3/0 up to 250 kcmil
M12 32 to 40 (283 to 354)
U/T1, V/T2, W/T3 3 3 up to 250 kcmil
⊖, ⊕1
- - up to 250 kcmil
⊕3
- - up to 250 kcmil M10 18 to 23 (159 to 204)
GND 1 1 up to 250 kcmil M12 32 to 40 (283 to 354)
<1> Refer to local codes while selecting wire size for terminals ⊖, ⊕1, ⊕2 if these terminals need to be used for other optional power devices.
<2> The wire size recommended for terminal ⊖, ⊕1, ⊕2 is for DC type additional impedance only. See the additional impedance type recommended
in Table A.15 before choosing wire size for terminals ⊖, ⊕1, ⊕2.
<3> Terminal wire range is the range of wire sizes the terminals can accept. This information is intended to keep within the wire range of the terminals
while selecting a wire size for the terminals per local codes for the intended application of these terminals.
n
Single-Phase Closed-Loop Crimp Terminal Sizes
Table A.19 Panduit Closed-Loop Crimp Terminal Size Single-Phase w/o Additional Impedance
Drive Model Terminal
Recomm.
Gauge Without
Additional
Impedance
AWG, kcmil
Screw
Size
Panduit Ring Terminal
(non-insulated)
Panduit
Recomm.
Installation
Tool
Panduit
Crimphead /
Die Part No.
Insulation Cap
Model No.
2o0004
2o0006
2o0008
2o0010
2o0012
R/L1, S/L2 14
M4 P14-8R CT-1570 - TP-003
U/T1, V/T2, W/T3 14
2o0018
2o0021
R/L1, S/L2 10
M4
P10-8R
CT-1570 -
TP-005
U/T1, V/T2, W/T3 14 P14-8R TP-003
2o0030
R/L1, S/L2 10
M4 P10-8R CT-1570 - TP-005
U/T1, V/T2, W/T3 12
2o0040
R/L1, S/L2 10
M4 P10-8R CT-1570 - TP-005
U/T1, V/T2, W/T3 12
2o0056
R/L1, S/L2 4
M6
P4-14R
CT-1701 -
TP-022
U/T1, V/T2, W/T3 6 P6-14R TP-014
2o0069
R/L1, S/L2 4
M8
P4-56R
CT-1701 -
TP-022
U/T1, V/T2, W/T3 10 P10-56R TP-005
2o0081
R/L1, S/L2 3
M8
P2-56R
CT-1701 -
TP-038
U/T1, V/T2, W/T3 10 P10-56R TP-005
2o0110
R/L1, S/L2 4
M8
P4-56R
CT-1701 -
TP-022
U/T1, V/T2, W/T3 10 P10-56R TP-005
2o0138
R/L1, S/L2 2
M10
P2-38R
CT-1701 -
TP-038
U/T1, V/T2, W/T3 8 P8-38R TP-008
2o0169
R/L1, S/L2 1/0
M10
S1/0-38R-X
CT-720
CD-720-2 TP-060
U/T1, V/T2, W/T3 6 S6-38R-E CD-720-1 TP-014
2o0211
R/L1, S/L2 2/0
M10
S2/0-38R
CT-720 CD-720-2
TP-060
U/T1, V/T2, W/T3 1/0 S1/0-38R TP-038
2o0250
R/L1, S/L2 3/0
M12
S3/0-12R-5
CT-720 CD-720-2
TP-080
U/T1, V/T2, W/T3 3 S2-12R-X TP-038
2o0312
R/L1, S/L2 1/0 X 2P
M12
S1/0-12R-X (Qty. 2)
CT-720 CD-720-2
TP-038 (Qty. 2)
U/T1, V/T2, W/T3 1 S2-12R-X TP-060
2o0360
R/L1, S/L2 2/0 X 2P
M12
S2/0-12R-X (Qty. 2)
CT-720 CD-720-2
TP-080 (Qty. 2)
U/T1, V/T2, W/T3 2/0 S2/0-12R-X TP-080
A.4 Drive Derating Data
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
415
A
Specifications