Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
88
to the source port from which the request came. Rport feature depends on support from a SIP
server.
Procedure
Rport feature can be configured using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure NAT Rport feature on a
per-line basis.
Parameter:
account.X.nat.rport
Web User Interface
Configure NAT Rport feature on a
per-line basis.
Navigate to:
http://<phoneIPAddress>/servlet?
m=mod_data&p=account-adv&q
=load&acc=0
Details of Configuration Parameter:
Parameter
Permitted
Values
Default
account.X.nat.rport
(X ranges from 1 to 16)
0, 1 or 2
0
Description:
Enables or disables NAT Rport feature for account X.
0-Disabled
1-Enabled
2-enable direct process
Web User Interface:
Account->Advanced->RPort
Phone User Interface:
None
To configure Rport feature via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.