Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
104
3) In the CA Certificates field, click Upload to select and upload the desired CA
certificate (*.pem, *.crt, *.cer or *.der) from your local system.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the phone.
To configure the 802.1X authentication via phone user interface:
1. Tap Settings->Advanced (default password: admin) ->Network->802.1x.
2. Tap the 802.1x Mode field.
a) If you select EAP-MD5:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
b) If you select EAP-TLS:
1) Enter the user name for authentication in the Identity field.
2) Leave the MD5 Password field blank.
c) If you select EAP-PEAP/MSCHAPv2:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
d) If you select EAP-TTLS/EAP-MSCHAPv2:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.